The AME certification is specialized licensing programme for servicing and maintenance of Aircraft and only those institutes approved by the DGCA can impart training in this field to prepare you for the AME exam conducted by the DGCA. DGCA will issue an AME license.
Aircraft Maintenance Engineers play a Major role among the Maintenance personnel to keep the Aircraft 'Airworthy' at all times. No civil Aircraft reg. in India can be operated without being certified as Airworthy by the Aircraft Maintenance Engineer’s holding AME licenses in the respective categories. The maintenance of modern sophisticated aircraft calls for high degree of technical knowledge, competence, proficiency & integrity on the part of the concerned personnel. Tremendous responsibility lies upon the Aircraft Maintenance Engineers who are certifying the modern sophisticated Aircraft’s, manned by experienced crew trained at high cost and great care carrying the precious load of ever increasing number of passengers.
JAI is approved by DGCA to offer this AME training course in Mechanical stream (Aeroplane & Powerplant) –comprising of Light Aeroplane (LA), Heavy Aeroplane (HA), Piston Engine (PE), Jet Engine (JE) Mechanical stream trains students to obtain an Aircraft Maintenance Engineer’s Licence with respect to maintaining an aircraft’s Airframe and Engine’s. JAI courses for the stream are of a three year duration consisting of six semesters, each semester of six months. The sixth and final semester being of 6 months duration of the AME course for Mechanical stream is devoted to on-the-job-training (OJT).This approval shall cease to be valid with effect from 01st August,2020
Jawaharlal Aviation Institute is offering CAR 147 Basic AME training in B1.1 (Aeroplane Turbine) Mechanical stream in line with DGCA’s
regulations as per CAR 147 Category B1.1 (Aeroplane Turbine) - Student enrolled under Category B1.1 (Aeroplane Turbine) is trained to obtain
an Aircraft Maintenance Engineer’s License for the maintenance performed on aircraft structure and power plant comprising of Heavy Aeroplane
(HA), Jet Engine (JE).
The entire syllabus (Modules ) are divided in to 04 Semesters (total o f 2400 hrs of Training) which would be covered in 02 years duration which
also include 288 Hrs of practical training at Maintenance Repair Organization of AI Engineering Services Limited (AIESL) Trivandrum as approved by
Director General Civil Aviation (DGCA).
| Modules | Subject |
|---|---|
| Module - 3 | Electrical Fundamentals |
| Module - 4 | Electronic Fundamentals |
| Module - 5 | Digital Techniques Electronic Instrument System |
| Module - 6 | Materials and Hardware |
| Module - 7A | Maintenance Practice |
| Module - 8 | Basic Aerodynamics |
| Module - 9 | Human factors |
| Module - 10 | Aviation legislation |
| Module - 11A | Turbine Aeroplane Aerodynamics, Structure and Systems |
| Module - 15 | Gas turbine Engine |
| Module - 17A | Propeller |
| Modules | Subject | Theory in hrs | Practical training in Hrs | Practical Training at MRO |
|---|---|---|---|---|
| Module - 3 | Electrical Fundamentals | 100 Hrs | 80 Hrs | No Practical training at MRO, will be held at College |
| Module - 6 | Materials and Hardware | 150 Hrs | 110 Hrs | |
| Module - 7A | Maintenance Practice | 50 Hrs | 30 Hrs | |
| Module - 8 | Basic Aerodynamics | 50 Hrs | 30 Hrs |
| Modules | Subject | Theory in hrs | Practical training in Hrs at JAI | Practical Training at MRO |
|---|---|---|---|---|
| Module - 4 | Electronic Fundamentals | 60 Hrs | 60 Hrs | 30 Hrs of familiarization/ training is conducted at AI Engineering Service limited Repair Organization at Trivandrum |
| Module - 7A | Maintenance Practice | 50 Hrs | 30 Hrs | |
| Miodule - 10 | Aviation legislation | 80 Hrs | No Practical | |
| Module - 11 | Turbine Aeroplane Aerodynamics, Structure and Systems | 140 Hrs | 35 Hrs | |
| Module - 15 | Gas turbine Engine | 85 Hrs | 60 Hrs |
| Modules | Subject | Theory in hrs | Practical training in Hrs at JAI | Practical Training at MRO |
|---|---|---|---|---|
| Module - 5 | Digital Techniques Electronic Instrument System | 90 Hrs | 80 Hrs | 150 Hrs of practical training is conducted at AI Engineering Service limited Maintenance Repair Organization at Trivandrum |
| Module - 10 | Aviation legislation | 100 Hrs | No Practical | |
| Miodule - 11A | Turbine Aeroplane Aerodynamics, Structure and Systems | 120 Hrs | 105 Hrs | |
| Module - 15 | Gas Turbine Engine | 35 Hrs | 70 Hrs |
| Modules | Subject | Theory in hrs | Practical training in Hrs at JAI | Practical Training at MRO |
|---|---|---|---|---|
| Module - 7 | Maintenance practice | 40 Hrs | 60 Hrs | 108 Hrs of practical training is conducted at AI Engineering Service limited Maintenance Repair Organization at Trivandrum |
| Module - 9 | Human Factors | 60 Hrs | No Practical | |
| Miodule - 11A | Turbine Aeroplane Aerodynamics, Structure and Systems | 70 Hrs | 110 Hrs | |
| Module - 15 | Gas Turbine Engine | 80 Hrs | 60 Hrs | |
| Module - 17 | Propeller | 80 Hrs | 40 Hrs |
This Institute conducts practical training in addition to class room instruction. JAI also have separate Lab/ workshop on Sheet metal
repair, general engineering, welding, Airframe, Piston engine, jet engine and also separate hangar space to accommodate serviceable
aircraft Learjet 25B and Cessna 150. This institute would also ensure that prescribed syllabus and curriculum as per DGCA so as the
student can appear for the module examinations for obtaining a license conducted by the DGCA. This Institute has been signed contract
with AI Engineering Service limited Trivandrum to undertake 288 Hrs of practical training on Aircraft Air bus 320. A MOU has also been
signed between the institute and AI Engineering Service limited approved by Director General Civil Aviation.
| Semester | Total practical training(Institute + MRO AI Engineering Service limited) | AI Engineering Service limited MRO Schedule |
|---|---|---|
| Semester II | 190 hrs | 30 Hrs |
| Semester III | 250 hrs | 150 Hrs |
| Semester III | 270 hrs | 108 Hrs |
During the Aircraft Maintenance Engineering Course the student would undergo a total of 2400 Hrs of Theoretical and practical training. JAI also trains the students on personality development, communication skill, General knowledge and current affairs on aviation. Guest lectures and industrial visits are also arranged for the students during the academic session.
Setting high standards with ambience of a sophisticated factory and provides workspace for innovative engineering functions
We have well equipped workshops with ample space for conducting practical training sessions to students. A separate work table is fitted bench-wise facilitating each trainee to undertake independent jobs. The workshop provides a noise-free, furnished space and an ambience with proper lights, ventilation, and with adequate fire extinguishing system.